We’ve had huge problems with the standard rear brake in our workshop because it’s not really a easy job to get this brake working correctly. The main problems areis, that the two M8-threats for the pivot pins are not exacty at the place they should be and most of the aftermarket brake shoes are not perfectly machined. The consequence of this circumstances are that the brake shoes are not centred exactly and the rear brake won’t do their job. With oru rear brake conversion kit you could center the brake pads individual! We’ve tested this brake with Innocenti, Serveta and SIL engine casings and the different rear hubs with out any problems, just with the reinforced „Tino Sacchi“ hubs you could have problems, because the inner diameter of them are too small.
Please note: For type approval and liability reasons, we advice that this conversion kit is intended for race or show use only. If you want to use it
on public roads, please consult your local vehicle approval authority
Not for use on public roads!
The kit contains:
- 1 x brake shoes Lucas/TWR
- 2 x spring
- 1 x adaptor plate
- 2 x countersunk head screw M8
- 1 x allen key screw M6
- 2 x pivot pin