Mr. B says:
"This is our MB Race-Tour rear hub bearing which fits all Series 1, 2 and 3 Lambrettas.
This is our 1st oversized 52.08 - 52.10mm bearing to take up play if a standard bearing is loose in the casing.
A quality bearing to suit standard or tuned scooters.
Now comes with slight improvments that standard bearings don't come with.
- Uses a large O ring which gets crushed in the casing to seal once fitted
- The inner bearing face is chamfered to aid fitting the seal
Comes with a MB seal and comes with our special O ring to help seal the bearing in place in the casing, the bearing now has a recess to locate the O ring.
Uses standard size rear hub seal 32 x 45 x 6mm.
If a standard supplied bearing drops into your casing ask for an oversized bearing as an exchange.
TOP TIP: use a bit of sealer smeared into the O ring groove, stretch the O ring over the bearing and push into the groove, otherwise the bearing will sit proud. Always use a bearing fitting tool to lock the bearing in place."
Product safety information
Manufacturer information:
MB Scooters
Pitman Road
DN12 4LJ Doncaster
Vereinigtes Königreich
info@mbscooters.co.uk
https://www.lambrettaspares.com
